PCB BLOG
If you have any questions about pcb design, pcb technology, or industry trends, then these articles will be helpful for you. Our team of experienced PCB experts are here to answer your queries and help you in any way possible.
Why The VOC Sensor Is an Important Tool for Your Building?
The volatile organic compound sensor measures the amount of VOCs in a space. It is an important tool for indoor air quality (IAQ) monitoring because
How to Fix a Cold Solder Joint: The Ultimate Guide
What is a Cold Solder Joint? Cold solder joints are one of the most common problems with electronics manufacturing. They happen when two metal surfaces
How to Solder Mask PCBs: The Basics and Common Mistakes
Solder mask and copper PCBs are both common manufacturing processes. A solder mask is a technique used to keep copper traces from oxidizing. The process
6 Layer PCB Manufacturing: The Complete Guide For PCB Designers and Manufacturers
6-layer PCB manufacturing is the mass-production of PCBs with a minimum of six layers. In a 6-layer PCB, the top and bottom layers are usually made of laminated material which is then covered with a dielectric layer, enameling, and a conductive layer.
How To Choose The Right Flexible Board For Your Project?
You might be wondering what exactly a flexi board is, and if they’re something you should invest time in learning about. As the name suggests,
PS4 HDMI PCB Fix – How to Repair A PS4?
If you own a PS4 Pro then you have most likely noticed that the console’s HDMI port is faulty. The HDMI port on your PlayStation
What is the difference between 4-layer, 6-layer, 8-layer and 10-layer PCBs?
4 Layer PCB is a vital part of the electronic components that make up modern devices. Every single electronic component has an electronic counterpart somewhere
The Best Resources About Through Hole PCBs
The through hole is a hole in an electrically conductive material through which leads are soldered, that is plated with a metal. The metal is occasionally chosen to be more corrosion-resistant than the solder. The other side of the board often has copper pads so that components can easily be soldered to the back side. Instead of making a surface mount version of a PCB, manufacturers can use through-hole components for certain applications, where it makes sense to have holes instead of pads.
About Author
Social Media
Most Popular Blog
Why The VOC Sensor Is an Important Tool for Your Building?
How to Fix a Cold Solder Joint: The Ultimate Guide
How to Solder Mask PCBs: The Basics and Common Mistakes
