This article aims to introduce the application of DMA2D mode through the STM32H563 development board. The so-called DMA 2D mode means that the DMA can dynamically adjust the addressing mode and capability of the DMA by setting the intra-block addressing offset and the block addressing offset in advance. In other words, when DMA performs data […]
Apply DMA2D Function with STM32H563 Nucleo Board Read More »
What is Arduino? Arduino is a convenient, flexible, and beginner-friendly open-source electronics prototyping platform that includes hardware (various models of Arduino boards) and software (Arduino IDE). It is suitable for artists, designers, hobbyists, and anyone who likes to tinker. Arduino can sense the environment through various sensors and interact with it by controlling lights, motors,
The STM32F103C8T6 core board is based on the official ST STM32F103C8T6 microcontroller chip. This compact and versatile board has been meticulously designed to create a minimal system configuration, making it an ideal choice for various embedded system projects. It offers a range of essential components, including circuits for BOOT mode selection, decoupling, crystal oscillator, SWD
STM32F103C8T6 Core Board – Schematic and PCB Design Read More »
PIC16F17146 microcontroller: USB, CAN, and advanced analog peripherals. Learn to use in industrial applications. Code examples and datasheet insights
ST’s STM32 Nucleo development boards encompass a range of options, including NUCLEO-F030R8 (supporting STM32F0), NUCLEO-F103RB (supporting STM32F), NUCLEO-F401RE (supporting STM32F4), and NUCLEO-L152RE (supporting STM32L1). These boards offer various combinations of performance, power efficiency, and features. The STM32 Nucleo development boards integrate the ST-Link debugger/programmer and are compatible with various development environments such as IAR EWARM,
About SAMD21 Microcontroller The SAM D21/DA1 is a family of low-power microcontrollers using a 32-bit Arm® Cortex®-M0+ processor and ranging from 32 to 64 pins with up to 256 KB of Flash and 32 KB of SRAM. The SAM D21/DA1 operates at a maximum frequency of 48 MHz, reaching 2.46 CoreMark/MHz. They are designed for
SAMD21 Xplained Pro Development Board Programming Read More »
If you’re looking for a powerful, yet compact WiFi development board, then the dt-bl10 is worth checking out. This versatile board packs a punch with its ARM Cortex-M4 processor and comes equipped with built-in WiFi capabilities, making it an ideal choice for a wide range of IoT applications. Whether you’re a seasoned developer looking to
DT-BL10 WiFi Development Board: The Ultimate Tool for Your IoT Projects Read More »
MSP430 features: ultra-low power modes, peripherals, and TI Code Composer Studio setup. Ideal for battery-powered devices. Programming tips and project examples!
STM32F030 Chip Introduction The STM32F030 chip is a low-cost, 32-bit ARM Cortex-M0 microcontroller from STMicroelectronics. It features up to 32KB of Flash and 4KB of SRAM, and can run at up to 48MHz. It includes a variety of peripherals, such as analog comparators, timers, and I2C and SPI interfaces. The STM32F030 also supports motor control
Microchip’s tinyAVR® family of microcontrollers with Core Independent Peripherals (CIP), high-speed internal oscillators and event systems has been widely admired. Microchip’s newly launched megaAVR® MCU – ATmega4809 series has larger storage capacity and more pins, and is an expansion of the tinyAVR series. This new ATmega4809 series is an ideal auxiliary MCU for complex systems
