About STM32F207 MCU
The STM32F207 is a microcontroller unit (MCU) from STMicroelectronics, designed for high-performance and low-power applications. It is based on the ARM Cortex-M3 core and offers a wide range of peripherals and communication interfaces. With its 32-bit architecture and clock speeds of up to 120 MHz, the STM32F207 provides efficient processing capabilities. It also features Flash memory, SRAM, and numerous I/O pins, making it suitable for various embedded applications such as industrial control systems, consumer electronics, and Internet of Things (IoT) devices.
Features
- Extreme running speed
- More storage space
- Excellent real-time performance
- Lower dynamic power consumption
- Real-time flash accelerator
- Flexible static memory interface
- Higher speed communication interface
- True random number generator
- Supports USB OTG in high-speed mode
- Video sensor interface
- More efficient fast DMA
- Multifunctional RTC 32-bit timer
- Used to expand off-chip memory and peripherals
- Encryption/Hash Processor: 3DES, AES256/SHA-1, MD5, HMAC
STM32F207VGT6
The STM32F207VGT6 is based on the high-performance ARM Cortex-M3 32-bit microcontroller and operates at up to 120 MHz. The series integrates high-speed embedded memory (up to 1 MB of Flash, up to 128 Kb of system SRAM), up to 4 Kb of spare SRAM, and a wide range of enhanced I/O and peripherals connected to two APB buses, three AHB bus and a 32-bit multi-AHB bus matrix.
The devices also feature the Adaptive Real-Time Memory Accelerator (ART Accelerator), which allows performance equivalent to executing a 0 wait-state program from flash memory at CPU frequencies up to 120 MHz. This performance has been verified using the CoreMark® benchmark.
All devices provide three 12-bit ADCs, two DACs, a low-power RTC, twelve general-purpose 16-bit timers, including two PWM timers for motor control, and two general-purpose 32-bit timers. True Random Number Generator (RNG). They also feature standard and advanced communication interfaces. New advanced peripherals include SDIO, an enhanced Flexible Static Memory Control (FSMC) interface for devices available in 100-pin packages and above, and a camera interface for CMOS sensors. The device also has standard peripherals.
STM32F207VGT6 Parameters
| Parameter | Value |
|---|---|
| Package Type | LQFP |
| Number of LIN Channels | 1 |
| Number of Pins | 100 |
| Number of I2C Channels | 2 |
| Core Processor | ARM Cortex M3 |
| Number of Timers | 17 |
| Data Bus Width | 32-bit |
| Number of ADC Units | 3 |
| Program Memory Size | 1 MB |
| Number of CAN Channels | 2 |
| Maximum Frequency | 120 MHz |
| PWM Resolution | 12-bit |
| Memory Size | 128 kB |
| Minimum Operating Temperature | -40°C |
| Number of USB Channels | 1 |
| ADC Resolution | 12-bit |
| Number of PWM Units | 2 |
| Maximum Ethernet Channels | 1 |
| ADC Channels | 24 |
| Timer Resolution | 16-bit, 32-bit |
| Number of SPI Channels | 3 |
| ADC Units | 3 (24 x 12-bit) |
| Typical Operating Power Voltage | 3.6 V |
| Size | 14.2mm x 14.2mm x 1.45mm |
| Number of USART Channels | 4 |
| Maximum Operating Temperature | +85°C |
| Number of Ethernet Channels | 1 |
| Pulse Width Modulation | 2 (12-bit) |
| Number of UART Channels | 2 |
| Program Memory Type | Flash |
| Timers | 1 (IWDG), 1 (WWDG), 12 x 16-bit, 2 x 32-bit |
STM32F207VGT6 Pinout
There’re four types of pinout configuration:
LQFP64, LQFP100, LQFP144 and LQFP176.
STM32F207 Series ICs Unlock
- STM32F207ZCT6
- STM32F207ZFT6
- STM32F207ICH6
- STM32F207IGT7
- STM32F207IGT6
- STM32F207VCT7
- STM32F207VET6
- STM32F207VGT6
- STM32F207ZGT6
